Home
New
order
Links
Privacy
Bookmark This Page
|
Britelyt Petromax Multi Fuel Lanterns and Accessories
The Britelyt Petromax may be the prettiest as well as the most
durable and versatile lantern on
the market today. It is made of solid brass and comes with your choice for polished brass or nickel plating. It is made to withstand
even the roughest
terrains. It shines with 500 candle power, the equivalent of 400 watts of electric light,
which is 4 times brighter then
most other pressurized lanterns. It burns for 8 hours on a qt. of fuel, or 32 hours per
qt. if set at a lower
pressure. It is capable of using a variety of fuels.... Kerosene, Coleman/white gas,
mineral spirits, scented
and unscented lamp oils, gasoline, diesel fuel and just about any flammable fuel
available. The first lanterns developed named Petromax were used by the German
armies before and during World War Two. The military significance of a lantern that
would burn all liquid fuels from diesel oil to gasoline made the lantern very useful. If you
need to
change fuels just pour whatever fuel you have directly into the tank. It doesn't hurt to
mix fuels and no special
attention is required to do so. It is well sealed to prevent leaks and enable indoor as
well as outdoor use.
This is wonderful for power outages and use in remote locations. Can't get much more
versatile than this. The Reflector is not included, but available below.
Super bonus: High Performance Mixing Tube and Stainless Steel Nozzle are included free of charge!
Each lantern comes with the following spare parts at no extra
cost!
1 - #68 - Needle
1 - #119 - Key for needle
1 - #11 - Rubber washer for filler gauge
1 - #180 - Cleaning needle for preheater
1 - Factory manual
1 - #50 - Nipple for upper vaporizer
1 - #66 - Spanner Wrench
1 - #165 - Funnel
1 - #67 - Alcohol tray filling bottle
2 - Petromax mantles
Petromax 500 CP Lantern Nickel Plate Finish
Please note: Petromax 500 CP in Nickel and Brass are temporarily out of stock.
We are expecting a shipment soon.
 |
Petromax 500CP Parts Kit with O-ring
This parts kit fits 500 CP BriteLyt lanterns that have the O-ring pump system.
The kit includes parts: #17-1,#18-1,#83-1,#193-1,#194-1,#195-1,#90-2,#50-1,
#68-2,O-Ring for pump-1,#11-1,#229-1. It is great for a fail safe back up to the
parts included with your lantern giving the security of spare parts in out-back
or survival situations. It allows you to replace parts worn out from rugged, heavy use,
or to rebuild older lanterns. This kit also fits older generations of 500CP lanterns
such as Petromax, Hipolito, Aida, and Geniol. If you have a lantern with a leather
pump you can up grade it for use with this kit by ordering our stock number
1189 O-Ring Kit.
Show Cart Petromax 150CP Parts Kit with O-ring
This kit fits the smaller 150CP Petromax lanterns.
Show Cart |
 |
You can purchase a reflector which focuses the light
down and outward. It is a very attractive addition as well. The lantern pictured has the
reflector installed. It fits the 500 cp lantern.
Petromax 500 CP Top Reflector Nickel Plate Finish Stock # 644 $32.95
Show Cart Petromax 500CP Top Reflector Polished Brass Finish Stock # 1788 $32.95
Please note: The Brass Top Reflector is temporarily out of stock.
We are expecting a shipment mid year 2010.
|
 | Petromax 500 CP Side Reflector Nickel Plate Finish Stock # 1105 $27.99
Show Cart Petromax 500CP Side Reflector Polished Brass Finish Stock # 1921 $27.99
Show Cart | Petromax 150 CP Lantern
This is the 500 CP lantern's little brother. It has all the same great features,
but puts out about 150 candle power (over 100 watts of lighting), and burns longer on the
same amount of fuel. It runs about 20 hours on a pint of fuel. Height 11 1/2". Please note, not all of the accessories are interchangeable
between the two models.
The Reflector is not included, but available below.
Super bonus: High Performance Mixing Tube and Stainless Steel Nozzle are included free of charge!
Petromax 150 CP Lantern Nickel Plated Finish
Show Cart Petromax 150 CP Lantern Polished Brass Finish
Show Cart
Last night the power went out and we tested the Petromax with reflector.
We were very
impressed. It provided as much light as our 5 bulb diningroom lamp fixture, so business
went on as usual
despite no electric power. Outside it lit up an entire area. May be just the thing for
picking garden produce
when the daylight runs out before the work is done.The Wahl
Family
An EZ-Cook adapter is available. It will let you cook on top of
your petromax lantern. It fits on all 500 candle power lanterns. It is constructed of
high-grade stainless steel.
Please note: The EZ-Cook Adapter is temporarily out of stock.
We are expecting a shipment soon.
|
High Performance Mixing Tube
The BriteLyt High Performance Mixing Tube provides better vapor flow, decreasing or eliminating the odor of fuel while
increasing light output and helping prevent yellowish or reddish light. The High Performance Mixing Tube works on all
500cp lanterns. It also eliminates the need for the butterfly adjustment screw on the mixing tube.
This item is included on all new lanterns
Show Cart |
|
Stainless Steel Nozzle for Petromax
This Stainless Steel Nozzle replaces part number 3 ceramic nozzles on all generations of 500cp lanterns.
It is stronger than the standard ceramic nozzle and doesn't loosen up. It provides 10% to 50% brighter light and
increases fuel efficiency of your lantern. The Stainless Steel Nozzle provides shorter preheating time, cleaner
mantel burn with oil based fuels, brighter burn with gas based fuels, and keeps the mantels cleaner with all fuels.
This item is included on all new lanterns
Show Cart |
|
Heat Shield - Protection Plate for Petromax
This Stainless Steel Heat Shield is for all generations of 826,523,828,829 500CP or 350CP Lanterns.
It keeps the fuel container cooler and even allows continued operation
of your lantern for a short while, with a broken mantle, without the
risk of unsoldering the upper lamp from the container. You
can also attach the BriteLyt Heating Adapter, our stock number 1630, to a spare
Heat Shield to make it quicker to change in and out.
This item is included on all new lanterns.
Show Cart |
|
BHA - BriteLyt Heating Adapter
This BriteLyt Heating Adapter increases the heating output of your Petromax BritLyt Lantern, allowing you to use your
lantern as a heater. It can be used with, or without a mantel. It is useful to combine with the Ez-cook adapter giving
you more heat for your stove. Heating, cooking, and light all from one lantern - now that is amazing!
The BriteLyt Heating Adapter can be used with our 500cp lanterns. It is made of sturdy, stainless steel construction and
comes with two screws for attaching to your lantern. Remember, always have ventilation when using these products.
Show Cart |
|

|
Britelyt EZ Pump Valve
The
Britelyt EZ Pump Valve. Makes pumping easier, and helps prevent mantle
breakage. Use bicycle pump (hand or foot), or with adapter, you can use CO2
cartridges. The adaptor can be purchased at any bicycle shop. Stock # 643 $9.75
Please note: Petromax EZ Pump is temporarily out of stock.
We are expecting a shipment soon.
|
|
O-Ring Pump
This replacement pump includes the new style O-Ring system. It is a complete drop-in replacement
for old or new style pumps. It increases the air intake
into the tank 30%-50% over leather washer pumps. The standard type O-Ring can be bought from hardware or home care stores
when needed. It fits both 150CP and 500CP pumps.
Please note: Petromax O-ring Pump is temporarily out of stock.
We are expecting a shipment soon.
|
 |
O-Ring Kit
This kit takes the place of your leather washer on older pumps. It increases the air intake
into the tank 30%-50%. The standard type O-Ring can be bought from hardware or home care stores
when needed. It fits both 150CP and 500CP pumps.
Show Cart |
Deluxe Carrying Cases
These black, ballistic nylon
carrying cases are convenient as well as attractive. They include a
detachable reflector case. They protect your lantern and accessories while keeping
everything handy.
Show Cart
Show Cart
The "BriteLyt" lantern is now the 5th generation of Petromax
products.
The generations are: Petromax, Aida, Hipolito, Geniol, and now
BriteLyt. This is in sequence of progession of models. All these lanterns are of the same
build, quality, and the parts are interchangeable.
The Britelyt Petromax Lanterns are Built to Last Generations !
Replacement Glass Globe for 500 CP Lantern Stock # 641 $9.99
Show Cart
Replacement Glass Globe for 150 CP Lantern Stock # 1074 $10.00
Show CartReplacement mantles
We were recently away from home with our Petromax and forgot to take a
spare mantle. We tried a generic mantel and found it did work, but gave off less light
than the Petromax ones, so remember to pack your spare
mantles!
Please note: Petromax 500 CP Mantles are temporarily out of stock.
We are expecting a shipment soon.
Show Cart
 |
150 CP Alcohol Conversion Kit
This kit allows you to convert your 150 CP lantern to burn 85% and up Isopropyl Alcohol or
Denatured Alcohol. This increases the versatility of your lantern letting you burn
any fuel you might have on hand, plus alcohol does not produce carbon monoxide when burned. This
kit makes it easy to swap in the alcohol conversion and re-convert your lantern back to its
original state. Kerosene is the preferred low carbon output fuel and alcohol
an emergency fuel if needed.
Show Cart |
 |
500 CP Alcohol Adapter
This allows you to burn alcohol in your 500CP Petromax with the added safety features of the
BriteLyt multi-fuel lantern. Kerosene is the preferred low carbon output fuel, and alcohol
an emergency fuel if needed.
Show Cart
|
BriteLyt Military All Weather and All Terrain Heating/Cooking/Lighting Package
This kit was designed for the Military, but campers, hunters and fishermen alike
will appreciate its versatility. It includes all the BriteLyt Petromax items
you need for Heating, Cooking, and Lighting, all packed in a metal case
that offers you neat storage and protects your lantern from the hazards of the trail.
The Lantern is equipped with the SS Nozzle and
High Performance Mixing Tube. All the accessories are packed neatly in trays
for secure storage and easy access. There is even a bicycle style foot pump included
for use with the EZ-Pump Valve. The Multi-Fuel capability of the BriteLyt Petromax
lantern, along with the completeness of the kit make it ideal for emergency or
survival situations.
Approx size and weight of box: L - 15"/ W - 10 1/2" / H - 19" Weight approx full: 26 to 30 pounds.
Items included in our Emergency/Military package.
- 1-Lantern Nickel Plate finish.
- 1-Reflector Nickel plated Finish.
- 1-EZ Cook Top
- 1-HP-BHA BriteLyt Heating Adaptor
- 2-1020-500CP Parts kit
- 1-74-WM Wire mesh Globe
- 24-4-500CP Mantles
- 1-Instruction DVD
- 1- EZ-Pump
- 1- Foot pump for EZ pump.
Please note: Petromax Military Kit is temporarily out of stock.
We are expecting a shipment soon.
|
 |
 |
BriteLyt Military All Weather/Terrain Metal Case
This case lets you store or transport your 500CP Lantern along with many accessories
or other gear you already have. It includes the Britelyt Metal Case, and storage
trays, but no lantern or accessories are included. The complete kit is available
above. Approx size of box: L - 15"/ W - 10 1/2" / H - 19".
Show Cart
|
|
|